Garden Sun Heater HS-SS Commercial Square - Manual (Page 8)

8
Step 2
Slip the connector hose through the two pieces of the heater post, as shown. The
connector will be factory assembled to the top heater post piece. Slide all three pieces
together and secure with the screws provide, as illustrated below. Make sure the holes
for the screws line up when sliding the pieces together.
COMMERCIAL OUTDOOR HEATER
Step 3
Place the cabinet on the base so that the five holes in the cabinet line up with the
mounting holes on the base. Once the cabinet is in position, insert hex bolts and tighten
with wrench.
X 5
BOTTOM SCREW &
LOCK WASHER X 8
CONTROLS
TOP
GAS HOSE PROTRUDES FROM THIS END
X 8 X 8