Final assembly, Final.assembly – E-flite Mini Funtana X ARF User Manual

Page 40

Text mode
Original mode

Final Assembly

Required Parts

Fuselage

Wing

Canopy

Receiver

Battery

Battery hatch

4-40 x 1" socket head bolt (2)

#4 washer (2)

Hook and loop tape

Hook and loop strap

Required Tools and Adhesives

Hex wrench: 3/32"

Felt-tipped pen

Canopy glue



1. Plug in the elevator and rudder servos and ESC

into the receiver. Mount the receiver to the inside
of the fuselage using hook and loop material.
Route the antenna wire through the bottom of the
fuselage to the rear, or as directed by your radio
instruction manual.

Note:.Do.not.cut.or.change.the.length.of.the.

antenna.wire,.as.this.will.reduce.the.range.of.

your.radio.system.