E-flite Mini Funtana X ARF - Manual (Page 36)

 5. Use thin CA to glue the fin to the fuselage.
Rudder and Elevator Servos
Required Parts
Fuselage
Micro control horn w/backplate (2)
5
3
/
4
" (145mm) pushrod wire
2mm x 4mm screw (2)
4
1 /
2
" (115mm) pushrod wire
Micro control connector w/retainer (2)
Servo (2)
18" (457mm) servo extension (2)
6
1 /
2
" carbon rod (2)
6 1 /
2
" carbon rod (2)
Required Tools and Adhesives
Phillips screwdriver (small) Hobby knife
6-minute epoxy
36