E-flite Mini Funtana X ARF - Manual (Page 30)

Stabilizer and Elevator
Required Parts
Fuselage w/wing installed
Stabilizer Elevator
CA hinge (4)
Required Tools and Adhesives
Hobby knife Felt-tipped pen
Ruler T-pins
Thin CA
 1. Hinge the elevator and stabilizer, using the same
process as described in Aileron Hinging. Use 6
hinges for this process.
 2. Position the stabilizer into the slot in the aft end
of the fuselage. Check that the elevators are an
equal distance from the fuselage.
30