Blaupunkt SEATTLE MP57 7 647 453 310 - Manual (Page 45)

99
EN
GLISH
External audio sources
Connecting external audio
sources
External audio sources, such as portable
CD players, MiniDisc players or MP3 play-
ers, can be connected to the device in two
ways:
Via the rear AUX input (if no CD changer
is connected to the device).
Notes:
An adapter cable is needed to con-
nect an external audio source via the
rear AUX input. You can obtain this ca-
ble (Blaupunkt no.: 7 607 897 093)
from your Blaupunkt dealer.
As soon as the rear AUX input is
switched on, it can be selected with
the
SOURCE button
4 (to switch
on the rear AUX input, please read
the following section). "AUXILIARY 1"
then appears on the display.
2. Via the front AUX-IN socket.
1.
•
•
DANGER!
Increased risk of injury from
connector.
In case of an accident, the protruding con-
nector in the front AUX-IN socket may cause
injuries. The use of straight plugs or adapt-
ers can lead to an increased risk of injury.
For this reason, we recommend using an-
gled jack plugs, e.g. the Blaupunkt acces-
sories cable (7 607 001 535).
Note:
As soon as the front AUX-IN socket is
switched on in the settings and an ex-
ternal audio source is connected, it
can be selected with the
SOURCE but-
ton
4 (to switch on the front AUX-IN
socket, please read the following sec-
tion). "AUXILIARY 2" then appears on
the display.
Switching on the rear AUX
input and front AUX-IN socket
(Auxiliary)
For external audio sources to be played
back via the rear AUX input and the front
AUX-IN socket, they must be switched on in
the settings.
Press the MENU button
A.
The menu is displayed.
Press the softkey "Aux Settings"
:.
The "Aux" menu is displayed.
u
u
External audio sources
02_SeattleMP57_gb.indd 99 02_SeattleMP57_gb.indd 99 08.03.2007 14:33:10 Uhr 08.03.2007 14:33:10 Uhr