BT Digital Cordless Telephone User Manual
Page 54
54
Elements – New Style – Edition 4 – 31.08.06 – 7644
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
6. Enter the 4 digit PIN code and press
.
When the base is located, your handset will display the base
ID number, press
to confirm registration to this base or
cancel by pressing
.
The handset is automatically allocated the next available
handset number which is displayed when in standby mode.
Registering another type of handset to your BT Elements
base
At the base:
1. Press and hold
until you hear a beep, then release it.
The base will now remain in registration mode for 90 seconds,
during which time you will need to complete the registration
procedure shown in the other manufacturer’s user manual.
Menu
Menu
If registration is unsuccessful, the
handset will return to standby mode.
Try moving closer to the base you
want to register to and following the
registration procedure again.
Handsets must be GAP compatible to
be able to be registered to your BT
Elements base.
Using additional handsets