BT Digital Cordless Telephone User Manual

Page 32

Elements – New Style – Edition 4 – 31.08.06 – 7644

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

3. Press or to

select

Dial Mode

and press

4. Use

to highlight the dial mode you want and

press

to confirm your selection.

5. Press repeatedly to exit and return to standby.

Recall mode

If your switchboard does not operate with the present recall
setting you can change it to earth loop recall by selecting
Earth.

There are 2 recall mode settings:

Recall – for time break recall. This is the default setting.

Earth – for earth loop recall.

1. Press

to open the main menu.

2. Press or until

Setup

is displayed, then press

3. Press or to

select

Recall Mode

and

press .

4. Use

to highlight the recall setting you want

and press

to confirm your selection.

5. Press repeatedly to exit and return to standby.

Menu

Switch temporarily to Tone dialling

If the dial mode is set to pulse dialling

you can switch temporarily to tone

dialling for the duration of the call.
After you press

to get a

line, press and hold

before you

enter the telephone number. The

number you enter will be dialled out

using tone dialling.

Please contact your network provider

is you are unsure which setting to use.

Set-up menu