Behringer Minifex FEX800 - Manual (Page 9)

9 MINIFEX FEX800 User Manual
5.3 Footswitch connection
The MINIFEX features a jack for connecting a footswitch. Here, you can connect any standard
footswitch with a 1/4" TS connector. As some footswitch models on the market have a different
polarity, please be sure to use one that is appropriately wired. The correct wiring is shown in
the illustration below.
Fig. 5.3: Wiring of a 1/4" TS connector for footswitch connection
6. Appendix
6.1 List of effects and parameters
Effect
no.
Effect
EDIT
Parameter 1
TAP/SELECT
Parameter 2
TAP/SELECT
LED
1 CATHEDRAL Reverb time Brilliance off/on
2 CONCERT Reverb time Brilliance off/on
3 CLUB Reverb time Brilliance off/on
4 CHAMBER Reverb time Brilliance off/on
5 GOLD PLATE Reverb time Brilliance off/on
6 GATED REV Reverb time Brilliance off/on
7 REVERSE Reverb time Brilliance off/on
8 AMBIENCE Room size Brilliance off/on
9 DELAY No. of repetitions Time interval TAP
flashing
(BPM tempo)
10 CHORUS Intensity Tempo TAP flashing (tempo)
11 FLANGER Intensity Tempo TAP flashing (tempo)
12 PHASER Intensity Tempo TAP flashing (tempo)
13 ROTARY Intensity Tempo off/on
14 PITCH SHIFT
Semi-tone steps
(+/-12)
Detune off/on
15 DELAY+REV
Delay vs. reverb
ratio
Time interval TAP
flashing
(BPM tempo)
16 CHORUS+REV
Chorus vs. reverb
ratio
Reverb time off/on
Table 6.1: List of effects and parameters
7. Specifications
Input
Type 1/4" TS connectors, unbalanced
Impedance approx. 30 kΩ
Output
Type 1/4" TRS connectors,
impedance balanced
Impedance approx. 220 Ω
Max. output level +10 dBu
In/Out
Type 1/4" TS footswitch connector
Digital Processing
Converters 24-Bit Delta-Sigma,
128-times oversampling
Sampling rate 48 kHz
System Specifications
Frequency response 10 Hz to 22 kHz, -3 dB
Dynamic range 96 dB, 10 Hz to 22 kHz
Distortion 0,01% typ. @ 0 dBFS
Crosstalk -75 dB @ 1 kHz
Signal-to-noise ratio 10 Hz to 22 kHz <86 dB @ 0 dBu,
A-weighted
Power Supply
Mains connection external power supply,
9 V~, 750 mA
Mains Voltage
USA/Canada 120 V~, 60 Hz
U.K./Australia 240 V~, 50 Hz
China 220 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Power consumption approx. 7.5 W
Dimensions/Weight
Dimensions (H x W x D) approx. 1.9 x 4.7 x 9.6"
approx. 48 x 120 x 242.6 mm
Weight approx. 1.46 lbs / 0.66 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these
efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or illustrated.
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
¼" TRS footswitch connector
ring
FX2
tip
FX1