Belkin F1DP116SEA User Manual
Page 43
39
section
System Administration
User Administration
At start-up, the system will prompt the user to enter the password to access the system.
The administrator can add or remove a user easily via the web pages.
There are two levels of access privileges:
An “Access Deny” page will display if the user is not authorized to access the web page.
Add User
To add a user:
• Check the users on the “User administration” screen.
• Click the “Add” button.
• Type the new user name and password.
User Name and Password Guidelines
• The first character of the user name must be an alphabet letter.
• The password should be at least three characters long.
• The user name or password must not be longer than 32 characters.
• Only an “admin” user can access the “Network” and “System administration”.
User Name
Default Password
Access Privileges
admin
admin
Full access
(user define)
(user define)
Only can access “Serial Port”
and “System Status”