Britax Wizard - Manual (Page 19)

Care and Maintenance
35
Care and Maintenance
34
Cleaning the Buckle
The buckle will need to be
periodically checked and cleaned
of any accumulated debris, dirt,
or dried liquids.
• THOROUGHLY RINSE, using
warm water (Fig. B).
• SOAK, overnight if possible,
using warm water to loosen
hardened drinks or food.
• TEST THE BUCKLE, by
fastening and unfastening
until a positive click is heard
after inserting the second
buckle tongue (Fig. C). If click
is not heard, repeat cleaning
procedure.
• TOWEL DRY
• DO NOT: Lubricate, use
solvents, abrasive cleaners,
soap or household detergents.
B
Buckle Unbuckle
C
Buckle Removal
1 Fully recline the child restraint.
2 Locate the metal buckle strap
retainer on bottom of the
restraint.
3 Pull retainer away from child
restraint to loosen.
4 Turn the retainer so that the short side will go through the slot
in the restraint shell (Fig. A).
5 Push the retainer through slots in the shell and cover, to the
front of the restraint.
Rethreading the Buckle
1 Locate the buckle slot.
2 Turn the buckle retainer so that the short side will go through
the slot in the cover and restraint shell (Fig. A).
3 Pull buckle away from restraint until tight, then verify that the
strap is not twisted and the release button is facing outward.
A
P2285_R02c.qxd 12/8/2003 12:22 PM Page 36