Metrohm MagIC Net Empower Driver - Manual

8.102.8049EN 1
Metrohm AG
CH-9100 Herisau
Switzerland
Phone +41 71 353 85 85
Fax +41 71 353 89 01
[email protected]
www.metrohm.com
Metrohm IC Driver for Empower™
Version 1.1
Installation
1 Minimum system requirements
Please refer to the Empower™ software documentation for information
regarding the technical requirements for your computer (PC).
Application soft-
ware ￭ Empower™ 3 software
￭ Microsoft Internet Explorer 8.0
Devices supported The Metrohm IC Driver for Empower™ supports the
following devices and instruments:
￭ 850 Professional IC
(version: 2.850.1010, 2.850.2010, 2.850.2030)
￭ 881 Compact IC pro
(version: 2.881.0010, 2.881.0020, 2.881.0030)
￭ 930 Compact IC Flex
(version: 2.930.1100, 2.930.1160, 2.930.1200,
2.930.1260, 2.930.1300, 2.930.1360,
2.930.1400, 2.930.1460, 2.930.1500,
2.930.1560, 2.930.2100, 2.930.2160,
2.930.2200, 2.930.2260, 2.930.2300,
2.930.2360, 2.930.2400, 2.930.2460,
2.930.2500, 2.930.2560)
￭ 940 Professional IC Vario
(version: 2.940.1100, 2.940.1110, 2.940.1200,
2.940.1300, 2.940.1400, 2.940.1410,
2.940.1500)
￭ 858 Professional Sample Processor
(version: 2.858.0010, 2.858.0020)
￭ 800 Dosino
(version: 2.800.0010)
One analyzer with conductivity detector
(850/881/930/940), one sample changer (858) and
up to five 800 Dosinos can be operated in one con-
figuration.
Firmware require-
ments ￭ 850/881 instruments: version 5.850.0109 or
higher
￭ 858 instruments: version 5.858.0010 or higher
￭ 930/940 instruments: version 5.940.0100 or
higher