Metrohm 728 Magnetic Stirrer - Manual (Page 16)

3.1 Setting up the instrument
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 ￭￭￭￭￭￭￭￭
728 Magnetic Stirrer
3 Installation
3.1 Setting up the instrument
3.1.1 Packaging
The instrument is supplied in highly protective special packaging together
with the separately packed accessories. Keep this packaging, as only this
ensures safe transportation of the instrument.
3.1.2 Checks
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.
3.1.3 Location
The instrument has been developed for operation indoors and may not be
used in explosive environments.
Place the instrument in a location of the laboratory which is suitable for
operation, free of vibrations, protected from corrosive atmosphere, and
contamination by chemicals.
The instrument should be protected against excessive temperature fluctu-
ations and direct sunlight.
3.2 Installing the magnetic stirrer
The 728 Magnetic Stirrer is fastened to a support rod with a diameter of
10 mm.
3.3 Connecting the magnetic stirrer
Power supply
The 728 Magnetic Stirrer needs 5 to 12 V DC voltage.
It can be operated directly at a Metrohm instrument with a stirrer connec-
tor.