2 general, 3 power connection, General – Metrohm 875 KF Gas Analyzer User Manual
Page 19: Power connection
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
■■■■■■■■
11
3.2
General
The 875 KF Gas Analyzer is delivered in a largely preconfigured state.
As a rule, the installation steps described in the individual manuals have
been carried out prior to delivery.
Additional notes are described in the subchapters below.
Fill the nitrogen drying cartridge with molecular sieve.
Establish the gas connections for nitrogen and, if required, for rinsing
medium with 6 mm Swagelok ferrule screw connectors.
Establish the gas connection for the sample with 1/16'' Swagelok ferrule
screw connector.
Connect the high-pressure waste gas and the waste gas of the coulome-
ter cell to the extraction system.
3.3
Power connection
WARNING
The on-site supply voltage has to match the voltage specified on the
875 KF Gas Analyzer's housing.
The instrument is set to either 110 V or 230 V at the power supply unit.
The 875 KF Gas Analyzer and the operating unit are both connected to a
socket with the preinstalled power feeder.
WARNING
Electrical connections may only be made by authorized specialist per-
sonnel.
- 915 KF Ti-Touch (382 pages)
- 800 Dosino (53 pages)
- 767 Calibrated Reference (23 pages)
- 940 Professional IC Vario ONE/SeS/Prep 2 (54 pages)
- 754 Dialysis Unit (49 pages)
- 815 Robotic Soliprep for LC (76 pages)
- Vision Manual (207 pages)
- tiamo 2.1 Manual (1532 pages)
- 825 Lab Link (37 pages)
- 808 Titrando (70 pages)
- 902 Titrando (52 pages)
- 756 KF Coulometer (163 pages)
- 756 KF Coulometer (162 pages)
- 940 Professional IC Vario ONE/LPG (98 pages)
- 850 Professional IC Anion MCS Prep 3 (154 pages)
- 850 Professional IC Anion MCS Prep 3 (152 pages)
- 904 Titrando (58 pages)
- 850 Professional IC Anion MSM-HC MCS Prep 2 (150 pages)
- 930 Compact IC Flex Oven/ChS/Deg (47 pages)
- 872 Extension Module Liquid handling (64 pages)
- 814 USB Sample Processor (90 pages)
- 814 USB Sample Processor (91 pages)
- 940 Professional IC Vario (43 pages)
- Vision – Tutorial (40 pages)
- 799 GPT Titrino (242 pages)
- 889 IC Sample Center (68 pages)
- 761 Compact IC (228 pages)
- 851 Titrando (100 pages)
- 748 DH Sample Changer (32 pages)
- 940 Professional IC Vario ONE/SeS/HPG (51 pages)
- 896 Professional Detector – Amperometry (62 pages)
- 877 Titrino plus (139 pages)
- 881 Compact IC pro – Anion (129 pages)
- 940 Professional IC Vario ONE/ChS/HPG (112 pages)
- 930 Compact IC Flex Deg (41 pages)
- 840 PC Control 5.0 / Touch Control (351 pages)
- 940 Professional IC Vario ONE/Prep 1 (45 pages)
- 776 Dosimat (42 pages)
- 717 Sample Changer (36 pages)
- 815 Robotic USB Sample Processor XL (113 pages)
- 815 Robotic USB Sample Processor XL (114 pages)
- 940 Professional IC Vario ONE/SeS/PP (126 pages)
- 838 Advanced Sample Processor Installation Instructions (109 pages)
- 700 Dosino (55 pages)
- 719 S Titrino (152 pages)