Metrohm Thin-Layer cell - Manual (Page 13)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
IC Equipment Thin-Layer cell
￭￭￭￭￭￭￭￭ 7
2 Unscrew the fastening screw from the reference electrode holder.
Push the fastening screw over the cable of the Ag/AgCl reference
electrode.
3 Check whether the sealing ring is seated on the reference electrode
and insert the reference electrode into the reference electrode
holder.
4 Tighten the reference electrode to the reference electrode holder
with the fastening screw.
Further information regarding the correct handling of the Ag/AgCl refer-
ence electrode can be found in the leaflet for the Ag/AgCl reference elec-
trode.