Metrohm Thin-Layer cell - Manual (Page 12)

3.2 Inserting the reference electrode
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 ￭￭￭￭￭￭￭￭
IC Equipment Thin-Layer cell
1
2
4
5
3
Figure 2 Ag/AgCl reference electrode (6.1257.720)
1 Plug 2 Reference electrode cable
Permanently mounted on the reference elec-
trode.
3 Sealing screw
For sealing the storage vessel. 4 Reference electrode
5 Storage vessel
For storing the Ag/AgCl reference electrode.
Insert the reference electrode as follows:
Inserting the Ag/AgCl reference electrode
1 Take the Ag/AgCl reference electrode out of the storage vessel. Pull
the sealing screw of the storage vessel over the plug and reseal the
storage vessel with it.