Metrohm 930 Compact IC Flex SeS/PP User Manual
930 compact ic flex
Table of contents
Document Outline
- Table of contents
- Table of figures
- 1 About these Short Instructions
- 2 Introduction
- 3 Overview of the instrument
- 4 Installation
- 4.1 Setting up the instrument
- 4.2 Removing transport locking screws
- 4.3 Connecting the drainage tubing and leak sensor
- 4.4 Connecting the eluent bottle
- 4.5 Installing the high-pressure pump
- 4.6 Installing an inline filter
- 4.7 Installing the pulsation absorber
- 4.8 Injection valve
- 4.9 Suppressor
- 4.10 Peristaltic pump
- 4.11 Metrohm CO2 Suppressor (MCS)
- 4.12 Installing the detector
- 4.13 Connecting the instrument to a computer
- 4.14 Connecting the instrument to the power supply
- 4.15 Initial start-up
- 4.16 Connecting and rinsing the guard column
- 4.17 Connecting the separation column
- 4.18 Conditioning
- 5 Operation
- 6 Warranty (guarantee)
- 7 Zubehör
- Index