Metrohm tiamo 2.0 Installation - Manual

8.101.8002EN 1
Metrohm AG
CH-9101 Herisau
Switzerland
Phone +41 71 353 85 85
Fax +41 71 353 89 01
[email protected]
www.metrohm.com
Installation tiamo 2.x
1 System requirements (minimal)
Operating system Windows 2000 SP4, Windows XP Professional SP2,
Windows Vista
RAM 1 GB (Windows 2000 / Windows XP)
2 GB (Windows Vista)
Memory Program: 500 MB
Data: 2 GB (for about 5000 determinations)
Serial ports for devices with RS232 interface
USB ports for devices with USB interface
The windows user must have administrator rights in order to be able to install
the tiamo software.
Additional requirements for the tiamo server:
Network 10 MBit/s, stable and permanent
Communication via TCP/IP
Operating system Windows 2000 SP4, Windows XP Professional SP2,
Windows 2000 Server, Windows 2003 Server,
Windows Vista
Caution
During a determination data loss may occur when the PC switches over to the
standby mode. In the energy settings of the operating system the standby
mode should therefore be deactivated.
2 Single workplace installation
With the single workplace version tiamo light or tiamo full the workplace and
database will be installed on your computer.