Metrohm 940 Professional IC Vario ONE/ChS/PP/HPG - Manual (Page 113)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Technical specifications
940 Professional IC Vario ONE/ChS/PP/HPG (2.940.1340)
￭￭￭￭￭￭￭￭ 105
7.12 Detector
You can find the technical specifications for the detector in the detector's
manual.
7.13 Sample degasser
Material Fluoropolymer
Resistance to sol-
vents No restriction (except PFC)
Time to establish
vacuum < 60 s
7.14 Power connection
Required voltage 100 - 240 V ± 10% (autosensing)
Required fre-
quency 50 - 60 Hz ± 3 Hz (autosensing)
Power consump-
tion ￭ 65 W for typical analysis application
￭ 25 W standby (conductivity detector to 40 °C)
Power supply unit ￭ Up to 300 W maximum, electronically monitored
￭ Internal fuse 3.15 A
7.15 Interfaces
USB
Input 1 USB upstream, type B (labeled PC for connecting to a computer)
Output 2 USB downstream, type A (labeled USB 1 and USB 2)
MSB 2 MSB 8-pin mini-DIN (female) (labeled MSB 1 and MSB 2 for Dosino,
stirrer, remote lines, etc.)
Detector 2 15-pin high-density D-sub (female) (labeled Detector 1 and Detec-
tor 2)
Column recogni-
tion 3 (including 2 in the column thermostat )
Leak sensor 1 jack plug (labeled Leak Sensor)
Further connec-
tions ￭ 1 15-pin D-sub (female) (labeled Extension Module)