Metrohm MagIC Net 2.3 - Manual (Page 14)

14 8.102.8027EN
Device driver software was not successfully installed. No driver
found. The message should also show the name of the corresponding device.
Note this name and proceed as follows to install the driver manually:
Note
The following description applies for Windows 7 (64 bit version). It may slightly
vary for your system.
1 Open the Windows Device Manager. Under Other devices the corre-
sponding device can be found.
2 Click on the device with the right mouse button. The context menu opens.
3 In the context menu, select Update Driver Software.... A dialog window
opens.
4 Select Browse my computer for driver software. The file selection dia-
log opens.
5 Navigate to the installation folder of MagIC Net (default: C:\Program Files
\Metrohm\MagIC Net).
6 In the installation folder, open the subfolder drivers. It contains a subfolder
for each of the corresponding devices, containing the necessary driver.
7 In the subfolder drivers, open the subfolder of the corresponding device
and select the driver file (*.inf).
8 Apply the selection with [OK]. A safety prompt is displayed. In order to install
the driver, click on [Install].
9 After the successful installation, close the Device Manager.