Metrohm 930 Compact IC Flex Oven/Deg - Manual (Page 25)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
930 Compact IC Flex Oven/Deg (2.930.2160)
￭￭￭￭￭￭￭￭ 17
4.6 Connecting the eluent degasser
The eluent degasser is completely connected. No installation work is
required.
4.7 Installing the high-pressure pump
The high-pressure pump is completely connected. No installation work is
required.
4.8 Installing an inline filter
The inline filter is completely connected. No installation work is required.
4.9 Installing the pulsation absorber
The pulsation absorber is installed between the high-pressure pump and
the injection valve. It protects the separation column from damage caused
by pressure fluctuations such as those when switching the injection valve,
and reduces interfering pulsations during highly sensitive measurements.
The pulsation absorber is completely connected. No installation work is
required.
4.10 Injection valve
The injection valve is completely connected. No installation work is
required.
4.11 Installing the detector
The 930 Compact IC Flex provides enough space for two detectors and
additional accessories in the detector chamber. The detectors are available
as accessories and are supplied with separate manuals.
Placing the detector in the instrument
Follow the instructions in the chapter Inserting the detector in the manual
for the detector.