Big Game Treestands CR4250-S - Manual (Page 26)

VITAL RATCHET INSTRUCTIONS
STEP 1. Thread strap through slot in the center of the ratchet reel. (see fig. 1) Remove
slack from strap by pulling loose end as tightly as possible. (see fig. 2)
STEP 2. Then ratchet handle back and forth to tighten straps, a minimum of two (2)
wraps around the ratchet reel is required. (see fig. 3)
STEP 3. After strap is tight, close handle to the lock position.
STEP 4. To remove tension, pull spring loaded retaining lock and open ratchet completely,
then manually pull strap to loosen. (see fig. 4)
RATCHET • FIGURE 1
RATCHET • FIGURE 3 RATCHET • FIGURE 4
RATCHET • FIGURE 2
2X Min.
93
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This Instruction Manual complies with the Treestand Manufacturers Association’s
TMS 04 - Standard Practice for Treestand Instructions & TMS 02 - Standard Test Method for Treestand Fall Arrest Systems
STORAGE AND CARE OF YOUR STAND
Your new treestand is factory finished with a state-of- the-art powder coating that
guarantees years of trouble-free service. It is recommended that you store your
treestand out of direct sunlight and out of any other harsh environmental condition(s)
that may adversely affect its performance.
OPTIONAL ACCESSORIES AND REPLACEMENT PARTS
Any number of innovative accessories are available and sold separately to compliment
your new climbing system. only genuine authorized accessories should be used with your
climbing system. Genuine replacement parts are also available online or via telephone.
Should you require parts or service, or if you just have a question about this, or any
other product(s), simply give one of our customer service representatives a call
toll-free at 800 -268 - 5077 or visit www.BigGameTreestands.com
BgTLS0112Ar.QE_StandManual_1/06.QE 1/9/12 3:22 PM Page 93