Metrohm tiamo 2.3 Installation - Manual (Page 5)

8.101.8044EN 5
An InstallLog file with a list of all files having been copied to your com-
puter and with a confirmation for a successful installation is saved in the
tiamo installation folder (default: C:\Program Files\Metrohm\tiamo) under
bin\InstallLog.
3 Client/Server installation
With the tiamo multi version (multiple workplace version with 3 licenses) you
can select during the installation whether you want to install a client (work-
place) or the server (incl. client) on your computer.
If you only want to install a client on your computer, in advance the server the
client will be connected to must have been installed on another computer.
1 Carry out steps 1 to 4 of the Single workplace installation.
2 The dialog window Additional installation information appears
where you can select whether you want to install a client or the server:
The option workplace installs the client and the database server on
your computer. Select this option if your computer will be used as server.
With workplace only the client will be installed and with you have
to select the database server (has to be installed in advance!) to which
you want to connect. The network server name or the IP address are
accepted.
Under [Advanced...] it is possible to change the ports tiamo uses to
communicate with the database and administration server. If the ports are
used already, an appropriate error message will appear. Ask your system
administrator for more information about this. Continue with [Next >].
3 Carry out steps 6 to 8 of the Single workplace installation.