Vizio Co-Star LT Stream Player - Quickstart Guide - Manual (Page 27)

25
Changing the Manual Setup Settings
Advanced users can fine-tune the network settings
using the Manual Setup feature.
To change advanced network settings:
1. From the Wi-Fi menu, highlight Manual Setup
and press OK. The Manual Setup menu is
displayed.
2. Use the Arrow buttons to highlight a setting
and press OK to enter a value using the
on-screen number pad. To delete a value,
highlight the button and press OK.
When you are finished entering a value, highlight
OK on the number pad and press OK. Use the
Arrow buttons to highlight another setting or if
you are finished press the Exit button.
• DHCP - (Dynamic Host Configuration
Protocol) This setting must be turned Off to
change any of the other settings.
• IP Address - The IP address assigned to the TV.
• Subnet Mask - The subnet mask.
• Default Gateway - Your network’s default
gateway address.
• Pref. DNS Server - Your preferred domain
name server address.
• Alt. DNS Server - Your alternate domain name
server address.
3. Press the Exit button on the remote.
Help
VIZIO
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
Panoramic Wide Zoom
2D 3D Exit
MANUAL SETUP
DHCP Off
IP Address ____.____.____.____
Subnet Mask ____.____.____.____
Default Gateway ____.____.____.____
Pref. DNS Server ____.____.____.____
Alt. DNS Server ____.____.____.____
Wireless MAC FF:FF:FF:FF:FF:FF
1 2 3
4 5 6
7 8 9
0 OK x
CANCEL
1 2 3
4 5 6
7 8 9
0 OK x