Constellation Audio Perseus Phono Preamplifier - Manual (Page 11)

11
Power supply connections
13. AC input
This AC input accepts standard 15-amp IEC-type power cords. You may use the high-quality power cord
supplied with the Perseus, or substitute an aftermarket power cord if you wish
.
14. Power outputs
These outputs use permanently attached cables that connect to the power inputs of the Perseus phono
preamp. Constellation Audio has permanently installed special spiral-wrapped, gold-plated copper
cables designed for aerospace use. Each of these cables is rated to handle 30 amps.
Each cable mates with a matching jack on the preamp. Be sure to connect the Analog Left power jack
on the phono preamp to the Analog Left power cable from the power supply; the Analog Left power
jack on the phono preamp to the Analog Right power cable from the power supply, and the Control
power jack on the phono preamp to the Control power cable from the power supply.
Before connecting these cables, switch off the power supply and disconnect it from the AC power.
Failing to do this can damage the Perseus or the power supply.