639561_pg 5 – CommScope ATC200-1000 User Manual
Page 6
Note: See www.commscope.com for complete user guide, Bulletin 639514.
10. The software f le is uploaded through the internet browser, which opens the
ATC200-1000 operating window on the PC/laptop.
11. Click on Back to see the uploaded antenna def nition f les list on the
controller
’s Software Confi guration screen displaying the Reboot button.
12. Antenna def nition f les take affect instantly after upload, e.g.
(RET
-AN-AT_*.ascu).
If uploading controller operating f rmware, you must reboot for updates
to take affect, e.g. (RET-AN-RT_*.ascu).
13. Click on Close.
13
10
11
12
www.commscope.com/andrew
Visit our Web site at www.commscope.com or contact your local Andrew representative for more information.
© 2009 CommScope, Inc. All rights reserved.
Andrew is a trademark of CommScope. All trademarks identif ed by ® or ™ are registered trademarks or trade-
marks, respectively, of CommScope. This document is for planning purposes only and is not intended to modify
or supplement any specif cations or warranties relating to Andrew products or services.
Andrew, A CommScope Company
Customer Support Center
North America:
+1-800-255-1479,
Option 1
International: +1-779-435-6500,
Option 1