Clearaudio INNOVATION Upgrade to Master - Manual (Page 2)

Upgrade
Innovation to Master Innovation
User manual
Page 1  clearaudio electronic GmbH 2014
Dear clearaudio customer,
Congratulations to your choice to upgrade your Innovation to a Master Innovation turntable,
a world class turntable, handmade in Germany by clearaudio electronic GmbH.
Like the model Innovation the Master Innovation has a resonance minimizing chassis
construction in a sandwich combination with the innovative motor unit (low noise level and
high turning moments), which guarantees total isolation of resonances from the turntable
chassis, providing the best music reproduction and authentic High End imaging.
The clearaudio patented CMB-Bearing-Technology, an inverted bearing with jewelled and
polished ceramic bearing shaft and a bronzed liner, provides frictionless analogue
enjoyment.
This user manual described the reconstruction from the turntable Innovation to the turntable
Master Innovation . For more information regarding the Master Innovation you will get a
separate user manual.
We wish you a lot of musical enjoyments with your new
clearaudio Master Innovation -turntable.
clearaudio electronic GmbH
This section must be read before any connection is made to the mains supply.
CE-MARKING
The clearaudio Master Innovation meets the regulations concerning
electromagnetic disturbance (EMC) and low-voltage appliances.
EQUIPMENT MAINS WORKING SETTING
Your clearaudio product has been prepared to comply with the household power and safety
requirements that exist in your area. This product can be connected to 230 V or 110 V AC
(50 Hz and 60 Hz).
COPYRIGHT
Recording und reproduction of any sound-material may require the consent of the creator.
Please acknowledge the information given in the
-
Copyright Act 1956,
-
Dramatic and Musical Performers Act 1958,
-
Performers Protection Acts 1963 and 1072,
-
any more recent legal regulations.
WARNINGS
Don’t expose your turntable to rain or humidity.
Don’t handle the mains leads with wet hands.
Don’t place or insert anything into the equipment or through ventilation holes.
No naked flame sources, such as lighted candles, should be placed on the equipment.