Upgrade innovation to master innovation – Clearaudio INNOVATION Upgrade to Master User Manual
Page 10

Upgrade
Innovation to Master Innovation
User manual
Page 9
clearaudio electronic GmbH 2014
Please pay attention that the exchanged
Master Innovation
pulley is flush mounted with the
axis of the motor.
Now the upgrade from the
Innovation
to the
Master Innovation
is completed and you can
switch over to the set – up of the
Master Innovation
.
In the user manual for the
Master Innovation
you will find the packing – list, packing
overview and of course the whole description for the set – up of the Master Innovation.
To make it easier for you, you can also go ahead with the following description:
7.)
In the next step remove carefully the lamination of the sensor on the upper surface of the
turntable chassis.
Please remove the lamination extreme carefully and avoid any soiling and
scratches.
Take the stainless steel sub - platter again carefully with both hands and put it onto the
bearing. The lower side must show to the bearing.
Through a lightly (!!) up and down movement the platter will slip onto the bearing upper
part (pic. 8 and 9).
Please remove the lamination extreme carefully and avoid any soiling and
scratches.
Pulley for
Master Innovation
Pic. 7: Set – up of the
Master Innovation
pulley
Distance is approx. 1,2 mm
Pic. 8: Set – up of the sub - platter
Pic. 9: Set – up of the sub - platter