Clay Paky MYTHOS (C61391) PRELIMINARY - Manual (Page 12)

12 MYTHOS
COLOR
CMY short-cut
It lets you optimise (ON) the color change time of the color wheel since the disk rotates in the direction that requires the
shortest and thus quickest movement. Select OFF to turn off or disable this option.
SHUTTER
Shutter on error
It lets you activate (ON) automatic "Stopper/Strobe" closing in the event of Pan/Tilt positioning error. Select OFF to turn
off or disable this option.
Dimmer on Shutter
Select ON to enable automatic Dimmer closing when the Strobe is fully closed. Select OFF to disable this option.
DIMMER FILTER TYPE
It lets you best optimise the "Dimmer curve" according to that set on the control panel. One of the following 2 options can
be selected:
DMX follower
Dimmer movement speed/linearity follows the DMX values set by the panel.
Position dependent
Dimmer movement speed follows the DMX values set by the panel taking into account the physical Dimmer starting
position.
MACRO EFFECTS
It allows you to select one of the 2 following options:
Macro Group size: Lets you select the number of projectors (minimum 2 and maximum 15) to be included in the “Macro
Effects” channel operation.
Macro fixture ID: It lets you attribute an ID address to the projector for the phase displacement for the scene’s starting
time in Macro Effects channel.
• Fixed to 1-15: (to assign to all the projectors to be included in the Macro Effects operation).
•
Auto by DMX Address: According to the DMX address, it automatically detects the starting sequence of the scene
in the Macro mode (to assign to all the projectors to be included in the Macro Effects channel operation).
SILENT MODE
Allows you to set the preferred mode of the 2 available:
Standard
Maximum speed and thus maximum noise effects.
Quiet
It handles the speed of some effects (Pan, Tilt, Focus), reducing the noise level.
DISPLAY
It lets you activate (ON) display brightness reduction after about 30 seconds in idle status. Select OFF to turn off or
disable this option.
SAFETY BEAM
It lets you turn ON a light beam temperature reduction when Focus movement is 50% over its stroke, if no CMY colour
wheels are inserted, Soft Filter is automatically inserted on the Cyan wheel.