Clay Paky ALPHA BEAM 1500 (C61310) - Manual (Page 10)

10 ALPHA BEAM 1500
SHUTTER
Shutter on error
Used for automatically closing the stop/strobe in the event of Pan/Tilt
position error.
1) Press
- the current settings appear on the display (On or Off).
2) Use the UP and DOWN keys to enable (On) or disable (Off)
automatic stop/strobe closing in the event of Pan/Tilt position error.
3) Press to confirm the selection, or LEFT to keep current
settings.
Dimmer on Shutter
Enables automatic closing of the dimmer when the strobe is completely closed.
1) Press
– the current settings appear on the display (On or Off).
2) Use the UP and DOWN keys to enable (On) or disable (Off)
the automatic closing of the dimmer.
3) Press to confirm the selection or LEFT to keep current
settings.
DISPLAY
Used for automatically reduce brightness on the display after about 30
seconds in idle.
1) Press
- the current settings appear on the display (On or Off).
2) Use the UP and DOWN keys to enable (On) or disable (Off)
the decreasing of display brightness.
3) Press to confirm the selection or LEFT to keep current
settings.
SETTING
Used to save 3 different settings of the items in the options menu and
relative submenus.
1) Press
- “Default preset” appears on the display.
2) Use the UP and DOWN keys to select one of the following
configurations:
- Default preset (*)
- User preset 1
- User preset 2
- User Preset 3
3) Press - “Load preset X” appears on the display.
4) Use the UP and DOWN keys to select:
- Load preset X to recall a previously stored configuration.
- Save to preset X to store the current configuration.
a confirmation message (Are you sure?) appears on the display.
5) Select YES to confirm the selection or NO to keep the current setting
and return to the next higher level.
(*) DEFAULT PRESET
Used for restoring default values on all options menu items and relevant
submenus.
1) Press
, a confirmation message (Are you sure?) appears on the
display .
2) Select YES to confirm the selction or NO to keep current setting.
OPTION
DEFAULT
Lamp DMX On
Invert Pan Off
Invert Tilt Off
Swap Pan-Tilt Off
Encoder Pan-Tilt On
Colour mixing CMY
Fixed Wheel Shortcut On
Shutter on error Off
Dimmer on Shutter Off
Display On
Reset To
Dafault
Go Back
Setting
Default
Preset
Load
Preset 1
Save To
Preset 1
User
Preset 1
Load
Preset 2
Save To
Preset 2
User
Preset 2
Load
Preset 3
Save To
Preset 3
User
Preset 3
Shutter
Shutter
On Error
On
Off
Dimmer On
Shutter
On
Off
On
Off
Display