Clay Paky A.LEDA B-EYE K20 (C61420) PRELIMINARY - Manual (Page 13)

13 A.LEDA B-EYE
9
WARNING:
no alcohol
CAUTION:
• Light collimation system
This product contains internal light collimation system. Avoid intense light from any angle.
To avoid damage to the internal parts of the fixture when the fixture is not working, is recommended to turn the head down before turning the fixture off, so
that the front lenses of the fixture are invested as little as possible from the sun or any intense light.
• Set channel 20 (Zoom) to 255-bit before turning off the projector to facilitate the packaging of the projector.
• To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of
the working environment (air humidity, presence of dust, salinity, etc.).
It is recommended that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following
operations:
- General cleaning of internal parts.
- Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Clay Paky.
- General visual check of the internal components, cabling, mechanical parts, etc.
- Electrical, photometric and functional checks; eventual repairs.
Cleaning the lenses
Only use neutral soap and water to clean the lenses, then dry it carefully with a soft, non-abrasive cloth. (WARNING: the use of alcohol or any other
detergent could damage the lenses).
Continue ➔