Clay Paky A.LEDA B-EYE K20 (C61420) PRELIMINARY - Manual (Page 10)

10 A.LEDA B-EYE
DISPLAY
Used for automatically reduce brightness on the display after about 30
seconds in idle.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off)
the decreasing of display brightness.
3) Press F to confirm the selection or LEFT D to keep current settings.
SPECIAL FUNCTIONS
Pan / Tilt speed
Lets you select two different Pan and Tilt speeds.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
- Normal
- Fast
3) Press F to confirm the selection or LEFT D to keep current settings.
Dimmer Curve
Lets you select four different Dimmer channel curves.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
- Curve 1
- Curve 2
- Curve 3
- Curve 4
3) Press F to confirm the selection or LEFT D to keep current settings.
RGB Gamma
Lets you select three different RGBW gamma curves.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
- Gamma 1.0
- Gamma 1.5
- Gamma 2.0
3) Press F to confirm the selection or LEFT D to keep current settings.
Halogen Mode
Lets you select five different halogen lamp simulations.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
- Halogen OFF
- Halogen Lamp 1 - 750 W
- Halogen Lamp 2 - 1000 W
- Halogen Lamp 3 - 1200 W
- Halogen Lamp 4 - 2000 W
- Halogen Lamp 5 - 2500 W
3) Press F to confirm the selection or LEFT D to keep current settings.
SETTING
Used to save 3 different settings of the items in the options menu and
relative submenus.
1) Press
F - “Default preset” appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
configurations:
- Default preset (*)
- User preset 1
- User preset 2
- User Preset 3
3) Press F - “Load preset X” appears on the display.
4) Use the UP B and DOWN C keys to select:
- Load preset X to recall a previously stored configuration.
- Save to preset X to store the current configuration.
a confirmation message (Are you sure?) appears on the display.
5) Select YES to confirm the selection or NO to keep the current setting
and return to the next higher level.
(*) DEFAULT PRESET
By pressing the RIGHT
E key and the LEFT D key simultaneously
once entered in the "main menu" it is possible to quickly (short cut)
reset the default settings (DEFAULT PRESET).
Used for restoring default values on all options menu items and relevant
submenus.
Option
Save To
Preset 3
Reset To
Dafault
Go Back
Setting
Default
Preset
Load
Preset 1
Save To
Preset 1
User
Preset 1
Load
Preset 2
Save To
Preset 2
User
Preset 2
Load
Preset 3
User
Preset 3
Dimmer
Curve
RGB
Gamma
Halogen
Mode
Special
Functions
Pan / Tilt
speed
On
Off
Display