Calibrated Software MPEG2-X Create v1 - Manual (Page 52)

Page | 53
Creating a MXF Preset in Compressor 3.5.3
IMPORTANT – always remember to set the ‘Field Version’ in the Options settings for the version of Compressor
that you are using
First select the ‘+’ button in the Settings window and choose ‘Calibrated OP1a MPEG2-X MXF’ in the drop-down menu
This will add a new
‘Untitled Calibrated OP1a MPEG2-X MXF’ preset in the Settings window. Make sure that this new
preset is highlighted and then press the ‘Options’ button to open the preset options.
By pressing the ‘Option’ button you will bring up the ‘Options’ panel to configure the preset. See the section below:
Options Panel in Compressor 3.5.3/4.1.2 for setting the different options in your new preset.