Calculated Industries 6025 - Manual (Page 23)

(cont’d)
6) Press [COUNT] ( S ) to increase or [RCL]
( T ) to decrease the selected digit. Press
the [M+] ( X ) key to move to the next
digit to the right or the [LxW] ( W ) key to
move back to the left.
7) Once the desired value has been entered,
press [SET] to store value and exit the
programming mode.
Note: Pressing [ON/CLEAR] will exit the
programming mode without saving any value as
the Custom Scale.
Entering a Custom Scale
1) Press [MODE] until # OPEN (# being
a number 1-3) appears in the scale box
display.
2) Press [SET] [SCALE] . “
ROLL
” will appear
in the main display.
3) Press [SCALE] again. The annunciator
will begin flashing “ FT IN ” for Imperial
Mode. The left-most digit flashes for
Metric Mode.
Note: If in Metric Mode, skip to Step 5.
19 – Scale Master
®
Pro