Calculated Industries 9530 User Guide - Manual (Page 8)

4 — TimeCard Tabulator II
b – Automatic Break
Enters a permanent time value that is
automatically subtracted from the “In”
and “Out” register totals, or when a
value is entered by pressing the
e
key. If entries are not defined as time
values, an error occurs.
® – Automatic Rounding
Permanently stores the rounding
value for the accumulated day hours.
Typical rounding values are 6 min-
utes (0.1 of an hour) and 15 minutes
(0.25 of an hour). The calculator can
be set to round the:
1) Actual clock “In” and “Out” times
2) Time span between the “In” and
“Out” times
3) Total day hours.
See “ Preference Settings”.
Timer Function Keys
S – Split / Lap Function
Pauses the timer display, without
stopping the timer. If the S/LP
preference is set to the “Split”
option, the total time elapse from the
start of the timer to the moment the
S key is pressed will be displayed.
If set to the “Lap” option, the elapsed
time between presses of
S is
displayed.
T – Stopwatch / Timer
Used to access the Stopwatch/Timer
Function.