Calculated Industries 9530 User Guide - Manual (Page 22)

18 — TimeCard Tabulator II
PAYROLL/TIMECARD APPLICATIONS
Setting up the Timecard Tabulator
Before you total up your first time card,
there are the following items to be con-
sidered when setting up your
TimeCard
Tabulator II:
1) Time format
2) Seconds display (On of Off)
3) Rounding method
4) Rounding period
5) Automatic breaks
6) Rate of pay
Setting the Time Format
Normally, the payroll daily and total
hours are shown in the decimal format
(e.g., 7.75
HR
, 8.25
HR
, 4.5
HR
). By
changing the preference setting, you
may change this value to H:M:S format.
Setting the Seconds Format
The
TimeCard Tabulator II is set not to
display seconds as part of the time
calculation results. This can be reversed
by changing the Preference setting.
Setting the Rounding Method
There are three available rounding
methods that can be set by changing
the Preference setting. The default for
this value is “Punch.”