Calculated Industries 8025 - Manual (Page 22)

P
OCKET
R
EFERENCE
G
UIDE
— 18
Using Memory Storage Keys (M0 - M9)
In addition to the standard cumulative
Memory (as previously described), your
calculator has ten independent Storage
Registers – M0 through M9 – that can be
used to permanently store single, noncu-
mulative values. The following example
shows the use of M0 (ß 0). To use M1
through M9, replace the presses of the 0
key with presses of the corresponding
number key (1 through 9).
You can replace a value in one of these
Memory registers by storing a new value in
place of the stored value.
FUNCTION KEYSTROKES
Store single value in M0 ß 0
Clear M0 0 ß 0
Recall M0 ® 0
Examples:
Store 175 into M1, recall the value, and
then clear the value.
KEYSTROKES DISPLAY
1 7 5 ß 1 M-1 175.
O o 0.
® 1 M-1 175.
0 ß 1 M-1 0.
STORED
STORED
STORED