Calculated Industries 4015 - Manual (Page 9)

[Conv] [+] — Pi ( π )
Internal constant = 3.141593.
[Conv] [–] — Change Sign Function
Toggles the sign of a value between pos-
itive and negative values.
[Rcl] [=] — Paperless Tape Feature
Accesses the paperless tape mode. See
the “
Paperless Tape ” section on page 17
for more information.
[Rcl] [x] — Metric Mode Toggle
Toggles between Imperial and Metric
defaults for the weight per volume factor
and the weight key. When you are in
Metric Mode, any value in meters will be
limited to three decimal places to the
right. To verify which mode you are in, do
an all clear (
[Conv] [x] ), then press [Rcl]
[Weight] . If the displayed unit of mea-
surement is kilograms, you are in Metric
Mode. If the displayed unit is tons, you
are in Imperial Mode.
[Conv] [•] — Per Unit Function
Used to calculate total material cost, if
you multiply the total amount of material
by the per unit cost of the item. For exam-
ple, to find the cost of 39.7 square yards
of carpet at $11.75 per square yard, enter
39.7
[Sq] [Yds] [x] 11.75 [Conv] [•]
which will give you $466.48.
User’s Guide – 9
4015-UG-B 4/4/03 12:29 PM Page 9