Calculated Industries 4015 - Manual (Page 15)

Fractional Settings
When you first receive your calculator it is
set to its default state. When in this state,
fractional values are rounded to the nearest
1/16 of an inch. However, you may program
your preference for six different accuracy
levels and two different modes (
Normal and
Fixed ), all of which remain in permanent
memory until revised or reset.
The fractional level can be revised by
using the keystrokes below:
Keystroke Fraction Setting
[Conv] 1 1⁄ 16
[Conv] 2 1⁄ 2
[Conv] 3 1⁄ 32
[Conv] 4 1⁄ 4
[Conv] 6 1⁄ 64
[Conv] 8 1⁄ 8
Note: Whenever the calculator is set to
anything other than 1⁄16 normal mode, a
star (★) will appear in the bottom left of the
display during power up to indicate a spe-
cial fractional setting has been stored with-
in. The fractional setting can be displayed
at any time by pressing [Rcl] [/].
User’s Guide – 15
4015-UG-B 4/4/03 12:29 PM Page 15