Calculated Industries 5070-B User Guide - Manual (Page 27)

26 — e
lectri
c
alc
® P
ro
Ohm’S laW
The ElectriCalc Pro’s built-in Ohm’s Law functions allow you to easily
solve for Voltage (Volts), Current (Amps), or Resistance (Ohms) by
entering in any two variables (e.g, Volts and Amps) and solving for
the third (e.g., Ohms).
Ohm’s Law: V = I x R
The Ohm’s Law functions on the ElectriCalc Pro are
identified as follows:
• Vdc = Voltage, in Volts
• Idc = Current, in Amps
• R = Resistance, in Ohms
finding Volts
The Current in a circuit is 0.0125 Amps, and the total Resistance is
480 Ohms. Find the Voltage.
KeysTRoKe DIsPlay
 
0.
1. Enter Current:
       (Idc) Idc 0.0125
a
2. Enter Resistance:
     (R) ohMs 480.
3. Find Voltage:
 
(Vdc) Vdc 6.
V
finding amps
A 120k electrical resistor is plugged into a 12 volt circuit. Find the
Current (in Amps).
KeysTRoKe DIsPlay
 
0.
1. Enter Resistance:
      (R) KohM 120.