Calculated Industries 5065 - Manual (Page 26)

User’s Guide — 21
Your calculator has the following Pref-
erence Settings that you can access
and change at any time.
Access the Preference Settings by
pressing
S Ö
. Then, to access
each category, press the
Ö
key until
the desired setting is reached. Within
each category, press the
+
or
-
keys
to toggle between individual selections
(note: the
+
will advance, the
-
will
back-up).
You can change these settings at any
time by repeating the above, and set-
ting in a new preference.
NOTE: To return the Preferences to the
default settings, perform a full reset (press
O
, hold down
x
, and press
o
), or
manually set them back using the key-
strokes below.
The Preference Settings are (default
settings shown first):
To Set 2005, 2002, 1999, or 1996 NEC
code:
S Ö
(1st press of
Ö
) NEC 2005
+
NEC 1996
+
NEC 1999
+
NEC 2002
Preference Settings