Calculated Industries 5065 - Manual (Page 25)

20 — ElectriCalc Pro
(Cont’d)
♦ Fifth Press
Shows remaining fill area. This value
may be negative if all wires are the
same size due to Note 7 in NEC Chap-
ter 9, Table 1.
Displays: REM WIRE AREA
S C
— Conduit Type (Cond Type)
♦ First Press
Displays the currently selected conduit
type.
♦ Second Press
Subsequent presses will display and
select the next conduit type from this
list:
1) EMT
2) ENT
3) FMC
4) IMC
5) LFNB
6) LFNA
7) LFMC
8) RMC
9) P-80
10) P-40
11) P-A
12) P-EB
To select a specific conduit type, enter
the corresponding number of the con-
duit and then press
S C
. If you
press this keystroke without entering a
number, the calculator will switch to the
next conduit type on the list.