Calculated Industries 4067 User Guide - Manual (Page 18)

C
onstruCtion
M
aster
P
lus
eZ
18
6) Rake Wall
Display Order
– deSCendinG raKe: Rake Wall studs are
displayed from largest to smallest size.
– aSCendinG raKe: Rake Wall studs are
displayed from smallest to largest size.
7) Jack Rafter
Display Order
– deSCendinG: Jack Rafters are displayed from
largest to smallest size.
– aSCendinG: Jack Rafters are displayed from
smallest to largest size.
8) Jack Rafter
Alignment
– JaCK aLiGnMent oC: On-center spacing
maintained on both regular and irregular sides.
– JaCK aLiGnMent Mate: On-center spacing
not maintained on both sides (regular/irregular
Jack Rafters “mate” at the Hip/Valley).
9) Run vs. Span
Entry
– run: Value for Run (half the distance of Span) is
used for rafter calculations).
– Span: Value for Span (twice the distance of Run)
is used for rafter calculations).
10) Linear Meter
Rounding
– 0.000 (FiX): Metric calculation results are always
displayed to three decimal places.
– 0. (aCtUaL): Metric calculation results are
always displayed to the maximum number of
decimal places.
11) Decimal Degree
Rounding
– 0.00º (FIXED): Decimal degree results are
always displayed to two decimal places.
– 0.º (ACTUAL):
12) Mathematical
Operation
– order of operations: The calculator uses the
Order of Operations Method (10 + 4 x 5 = 30).
– order of entry: The calculator uses the Order of
Entry Method (as entered: 10 + 4 x 5 =70).
13) Fractional Mode – Standard: Fractions are displayed to the nearest
Fractional Resolution.
– Fixed: Fractions are displayed in the set
Fractional Resolution.
Appendix B
basiC CalCulaTor funCTions anD
DiMensional MaTh operaTions
Linear dimensions
Examples of how linear dimensions are entered
(press O after each entry):
dimensions Keystroke
4.5 Inches 4.5i
95 millimeters 95C9
85 centimeters 85C7
1,320 Feet 1320f
201 meters 201m
Square and Cubic dimensions
Examples of how square and cubic dimensions are entered
(press O after each entry):
14 square Inches 14ii
5 square meters 5mm
1.5 cubic meters 1.5mmm
3 cubic Feet 3fff
ConVersions
Linear Conversions
Convert 10 Feet 6 Inches to other dimensions, including metric:
OO 0.
10f6i 10 Feet 6 inCh
Ci 126 inCh
Cf 10 Feet 6 inCh
Cy 3.5 Yd
Cm 3.200 M
C7 (centimeters) 320.04 CM
C9 (millimeters) 3200.4 MM
Convert 15 Feet 9-1/2 Inches to decimal Feet. Then convert back to
Feet-Inch-Fractions.
OO 0.
15f9i1/2 15 Feet 9-1/2 inCh
Cf 15.791667 Feet
Cf 15 Feet 9-1/2 inCh
Convert 8-1/8 Inches to decimal Inches. Then convert to decimal Feet.
OO 0.
8i1/8 8-1/8 inCh
Ci 8.125 inCh
Cf 0.6770833 Feet
Convert 9.0625 Inches to fractional Inches. Then convert to decimal Feet.
OO 0.
9.0625i 9.0625 inCh
Ci 9-1/16 inCh
Cf 0.7552083 Feet
Square and Cubic Conversions
Convert 6 square Feet to other square dimensions:
OO 0.
6ff 6 SQ Feet
C9 (millimeters) 557418.24 SQ MM
Cm 0.5574182 SQ M
C7 (centimeters) 5574.1824 SQ CM
Convert 0.05 cubic meters to other dimensions:
OO 0.
.05mmm 0.05 CU M
C9 (millimeters) 50000000. CU MM
C7 (centimeters) 50000. CU CM
Ci 3051.1872 CU inCh
Cf 1.7657333 CU Feet
Weight Conversions
Convert 1.5 tons to pounds and kilograms:
OO 0.
1.5C6 (Tons) 1.5 ton
C1 (kilograms)
1360.7741 KG
C4 (lbs) 3000. LBS