Calculated Industries 4067 User Guide - Manual (Page 16)

C
onstruCtion
M
aster
P
lus
eZ
16
3. Start Crown Molding function:
e
4. Enter Corner Angle of 60º:
60e
5. Enter 38º Spring Angle and solve for Crown Molding:
38e
MITER ANGLE 46.84°
e BEVEL ANGLE 43.03°
Compound Angle Function
Required Entries Possible Solutions
Number of Sides
Corner Angle
• Required if Number of Sides
not entered
Tilt Angle
• Miter Cut Angle
• Miter Blade Angle
• Corner Angle
Solve for 8 sides and a tilt angle of 85°:
1. Clear Calculator:
OOO
2. Go to Extras function:
CN
(If necessary, continue pressing N until COMPOUND ANGLE displays.)
3. Start Compound Angle function:
e
4. Enter number of Sides:
8e
5. Enter Tilt Angle and solve Compound Angle:
85e
MITER ANGLE 2.07°
e MITER BLADE ANGL 66.98°
e CORNER ANGLE 135.00°
Solve for a corner angle of 120° and a tilt angle of 45°:
1. Clear Calculator:
OOO
2. Go to Extras function:
CN
(If necessary, continue pressing N until COMPOUND ANGLE displays.)
3. Start Compound Angle function:
e
4. No entry for Sides:
e
5. Enter Corner Angle:
120e
6. Enter Tilt Angle and solve Compound Angle:
45e
MITER ANGLE 22.21°
e MITER BLADE ANGL 37.76°
Polygon Function
Required Entries Possible Solutions
Number of Sides
One of these required:
• Side Length
• Outside Diameter
• Inside Diameter
Exterior Angle
Interior Angle
Side Length
Outside Diameter
Inside Diameter
Perimeter
Area
Solve for a Polygon with 8 sides, each 10′ long:
1. Clear Calculator:
OOO
2. Go to Extras function:
CN
(If necessary, continue pressing N until POLYGON displays.)
3. Start Polygon function
e
4. Enter number of Sides:
8e
5. Enter Side Length and solve Polygon:
10fe
OUTSIDE ANGLE 45.00°
e INSIDE ANGLE 135.00°
e OUTSIDE DIAMETER 26 FEET 1–9/16 INCH
e INSIDE DIAMETER 24 FEET 1–11/16 INCH
e PERIMETER 80 FEET 0 INCH
e AREA 482.84271 SQ FEET
Solve for a Polygon with 6 sides and an outside diameter of 5′ 6″:
1. Clear Calculator:
OOO
2. Go to Extras function:
CN
(If necessary, continue pressing N until POLYGON displays.)
3. Start Polygon function:
e
4. Enter 6 Sides:
6e
5. No Side Length:
e
6. Enter Outside Diameter of 5′ 6″ and solve for Polygons:
5f6ie
OUTSIDE ANGLE 60.00°
e INSIDE ANGLE 120.00°
e SIDE LENGTH 2 FEET 9 INCH
e INSIDE DIAMETER 4 FEET 9–3/16 INCH
e PERIMETER 16 FEET 6 INCH
e AREA 19.647951 SQ FEET
Spacing Function
Required Entries Possible Solutions
Coverage Length
At least one of these:
• Object Quantity
• Target On-Center Spacing
Number of Objects
Object Spacing
Object Gap
Various Object Positions
Optional Entries
Object Width
• Default value: 1-1/2″
Number of End Pieces
End Position*
End Location*
Mark Position
• ID - Inside Dimension
• OC – On-Center
• OD – Outside Dimension
* End Position and End Location are only displayed if only one end piece is entered.
Find the spacing between three 42″ ceiling fans equally spaced across a
25′ ceiling:
See Diagrams on page 22 ►