Bully Dog 44632 Mercedes Rapid Power Module - Manual (Page 7)

6
5. Connect female module plug to the rail pressure sensor male end. This will complete the
installation of the plug set. See the picture below for an example of a completed plug set
install.
6. Secure module and the wiring
harness as far away from heat and
moving parts as possible using the
velcro and zip ties that are included
in the package.
7. With the module secured, quickly
recheck all of the plugs to make sure
that they are fully snapped together.
Then start the engine to make sure
that everything is working and take
the vehicle for test drive. the module
has been secured start engine and
enjoy.
Female module Plug connected to rail sensor male plug
Installation sec. 1