beautypg.com

Removing stock intake, Removing the stock intake – Bully Dog 221103 Rapid Flow Induction Cold Air Intake User Manual

Page 3

background image

2

Removing Stock Intake

removIng the Stock Intake

1. Locate the stock air intake inside the engine bay on the driver side of the vehicle.

2. Loosen the hose clamp around the intake hose using a flat head screw driver and disconnect.

3. Remove the Stock Air Intake lid by unsnapping the two clamps on the side.

4. Remove Stock Air Filter and then clean the inside of the stock box before installing the Bully Dog

air intake.