Bully Dog 51100 Rapid Flow Induction - Manual (Page 5)

RAPID FLOW INDuCTION
INSTALLINg ThE rFI
1. Remove the lid from the RFI. To re-
move the lid, pull outward on the
black button and then simply lift the
lid off of the RFI.
2. With the lid removed, set the RFI filter
housing down into the engine bay
where the stock air box usually fits.
3. Secure the intake using three of the
four bolts that were removed from
the stock system. For convenience
and ease, use an extension while
tightening the bolts.
4. Connect the intake tube to the RFI.
Secure the connection using the band
clamp on the end of the intake tube.
5. Install the filter on to the RFI outlet.
Use a flat head screw driver to tighten
the band clamp that goes around the
filter.
6. To complete the installation slide the
lid into place and secure the lid using
the snap.