Bully Dog 81205 Rapid Flow - Manual (Page 7)

8
8
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81050,81205
2. Place all of the supplied Hangers into their
appropriate locations as shown in the above
diagram.
3. Install the Down Pipe. You will use the stock
band clamp to secure the Down Pipe to the
turbo. Secure the Down Pipe by tightening
the stock band clamp with a 7/16” deep
socket.
4. Secure the Second Piece Down Pipe to the
Down Pipe using one of the supplied clamps.
At this point, secure the connection so that
the piece will stay, but do not tighten down
until the entire exhaust is installed.
5. Reinstall the Catalytic Converter by
connecting it to the Second Piece Down
Pipe. Remember to install the included
gasket, tighten and secure with bolts.
7/16”
Hang the Hangers
Tighten Band Clamps
Reinstall Catalytic Converter
Second Piece Down Pipe Catalytic Converter
Gasket