Bully Dog 83410 Rapid Flow - Manual (Page 7)

8
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 83410
2. Place all of the supplied Hangers into their
appropriate locations.
3. Install the downpipe using the factory
turbo clamp. Snug the clamp down so
that it will hold the pipe. You will need
to ensure that the hanger is connected
correctly before tightening anything
down.
4. Weld the catalytic converter to the Down
Pipe.
5. Install the Muffler using hanger D. This
will determine where everything else
will go.
SwITCH DIRECTIONS: THE NEXT STEPS wILL BE FROM THE BACk OF THE TRUCk
Install Muffler
Install all Hangers
Install Downpipe