Bully Dog 84100 Rapid Flow Exhaust System - Manual (Page 9)

8
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 84100
Driver side 2
6. Install Axle piece 1, use the stock hanger location and the hanger that is welded onto Axle piece 1.
7. Install the muffler onto the end of Axle piece 1. With the muffler temporarily attached to Axle piece 1 mea-
sure the excess length on tube: passenger side 1, and driver side 2. Then remove the muffler and cut any
excess length on the end of those two tubes.
Some vehicles do not require any cutting.
8. Attach the muffler using clamps to Axle piece 1, passenger side 1, and drivers side 2. Then attach Axle piece
number 2.
Axle 1
Axle 1
Axle 2
Muffler