Bully Dog 51104 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 6)

5
Stainless Black Oxide Screws & Nylon Washers: The two Phillips style stainless black
oxide screws and Nylon Washers are included with the kit and are used to secure the MAF sensor
to the air intake tube.
Air Filter and Clamp: The air filter included is an ISO
5011 certified eight layer oil filter. The air filter is secured
onto the end of the air intake tube using the filter clamp
and a flat-head screwdriver.
Security Torx Bit: This bit is included for convenience;
the mass air flow sensor is attached to the stock intake
tube using security Torx screws. If this bit is lost it can be
ordered.
Parts Description